Folding Wall Mounted Clothes Hanger Rack Clothes Hook Stainless Steel 304 with Swing Arm Holder Clothing Hanging System Closet Heavy Duty Drying Rack Nail Free Screw No Holes No Damage Wall 2 Pack
About this product
*RUST PROOF: Made by T-304 premium-grade stainless steel, plus 18/10 Chromium/Nickel coating on the surface and fine polishing, which makes the surface shiny, and assures the quality, prevent corrosion & rust.
*SPACE SAVER: It can swing 180 degrees to the left and right; You can swing it close to the wall to save space when you don`t use it,
*SCIENTIFIC DESIGN:When you use it，The gravity of the hanging object on the swing arm will be transmitted to the bracket to stop it from swinging. If you accidentally Collisions it, The swing arm will swing and give way for you.Ideal for use in bedrooms, bathrooms,closets,Not afraid of dampness and oil,
*HUMANIZED INSTALLATION DESIGN: Two ways to fix it,We are equipped with two pieces of strong adhesive screws, can avoid make holes on your wall or damage you wall. This type of installation is suitable for used by less than 15lb;And we have retained the classic installation mode,drilling holes and fixing with screws, suitable for hanging relatively heavy things.we konw, that made our cost has increased,but that can make convenient for you
*QUALITY ASSURANCE: If accordance with the regulations and correct use, We provide two years quality assurance, Normal use of damage within two years, We will give you a new product for change
Description
Packing List
Swing arm holder:2set
Screw assembly:2set
Nail-free Strong adhesive screws:4pcs
Materials?SUS304 stainless steel+Strong adhesive
Quality Assurance Period?2YER
SIZE:Please look at the picture of dimensionÂ
INSTALL BY DRILLING
1.Mark the position of the holes for drilling on the wall according to the hole position on the plate.
2.Drill holes on the wall?drill 2 ?6mm*30mm holes on the wall Â
3.Insert the expansion screws into the holes and make them inside the wall
4.Place the plate onto the wall, Make sure that the holes on the plate and the holes on the wall are
at the same place. Insert the inner bushing into the screw and use a screwdriver to tighten them into
the expansion screw holes and finally install the decorative cover.Â
5.Put the swing rack into the tube to finish the installation
INSTALL BY NAIL-FREE STRONG ADHESIVE SCREWS
1.Wipe the surface to remove oil, Water and dust
2.Remove the nut and fix it on the hole of the object to be installed. Use the pencil to mark around the
surface of the product,Remove the object to be installed, Tear off the protective sticker, Align the mark,
And squeeze it with a rag. Press out the residual air between the adhesive and the wall
3.Paste the hook one by oneÂ
4.Put on the screws one by oneÂ
5.Test the hook by your hand.Check that the installation is secureÂ
6.Put the swing rack into the tube to finish the installation
MUST WAITING LEAST 12 HOURS ,SUGGEST 24 HOURS,
BECAUSE THAT CAN MAKE THE BONDING STRENGTH UP TO THE HIGHEST
Related Products
![Newdora [2 Pack] Folding Wall Mounted Clothes Hanger Rack Clothes Hook Stainless Steel with Swing Arm Holder Clothing Hanging System Closet Storage Organizer Heavy Duty Drying Rack Wall Mount Hanger](https://www.speedhanger.com/image/cache/catalog/img/41c/41c0xZsBhcL._AC_-250x250w.jpg)
![Newdora [2 Pack] Folding Wall Mounted Clothes Hanger Rack Clothes Hook Stainless Steel with Swing Arm Holder Clothing Hanging System Closet Storage Organizer Heavy Duty Drying Rack Wall Mount Hanger](https://www.speedhanger.com/image/cache/catalog/img/411/411W8Kkr2jL._AC_-250x250w.jpg)
